E5 One Over One Static Pole Monitor Arm

• Holds two monitors stacked one above the other on a single pole with one desk mount.
• Part of the E5 Static Pole family: the Two Over Two Static Pole and Three Over Three Static Pole hold four or six screens on the same stacked design.
• Each screen can be up to 49 inches and 30 pounds.
• Static design: set each screen’s height on the pole once and it stays put.
• Mounts from the top of the desk with one tool. The tool stores inside the mount.
• Each screen tilts, turns side to side, and rotates from landscape to portrait.
• Set how far each arm can swing (90, 180, or 360 degrees) from the outside, no disassembly.
• The mounting plate releases with one hand, so you can swap monitors in seconds without tools.
• Cables run down the arm and the pole and stay out of sight.
• Best of NeoCon 2024 Gold award winner.

 
Watch the E5 Static Pole assemble from the base up:

• Monitor Size: two screens, each up to 49 inches measured across the front (ultrawide monitors qualify) and up to 30 pounds.
• Monitor Mount Size: needs the standard 4-hole pattern on the back of the monitor (called VESA, 75 mm or 100 mm). Almost all monitors have it; if yours has a removable stand, it does.
• Desk Thickness: any desk up to 1.5 inches thick, using the included edge clamp.
• Grommet Hole Size: if your desk has a grommet hole at least 2 inches wide, you can mount through it instead. That hardware is included too.

 
No wall, no drilling, no extra tools. Everything needed comes in the box.
 
 
Click here for the Product Brochure PDF

Click here for the Assembly Instructions PDF
 
 

• Holds two monitors, each up to 49 inches (measured across the front) and up to 30 pounds.
• The two screens sit one above the other on a single pole that stands 32.6 inches above the desk.
• The top screen’s mounting plate can sit up to 33.6 inches above the desk.
• Each mounting plate sits 5 inches out from the pole.
• Each screen tilts, turns side to side on three rotation joints, and rotates from landscape to portrait.
• Arm swing can be limited to 90, 180, or 360 degrees.
• Monitor mount: the standard VESA pattern, 75 x 75 or 100 x 100 mm, on a quick-release adapter.
• Desk mount is 6.8 inches wide and needs half an inch of clearance behind the desk edge.
• Fits desks up to 1.5 inches thick.
• Available in White, Silver, or Black.
• 15-year warranty.

Ships free to the contiguous US by UPS. Leaves HAT Collective in 1 to 2 weeks. Arrives boxed and complete, with the pole, both monitor arms, the edge clamp, and the through-desk mounting hardware. No freight truck, no loading dock, no signature hassle: it comes like any parcel.